go - start application at address 'addr'
run - run commands in an environment variable
bootm - boot application image from memory
bootp - boot image via network using BootP/
TFTP protocol
tftpboot- boot image via network using
TFTP protocol and env variables ipaddr and serverip
rarpboot- boot image via network using RARP/
TFTP protocol
bootd - boot default, i.e., run 'bootcmd'
loads - load S-Record file over serial line
loadb - load binary file over serial line (kermit mode)
autoscr - run script from memory
md - memory display
mm - memory modify (auto-incrementing)
nm - memory modify (constant address)
mw - memory write (fill)
cp - memory copy
cmp - memory compare
crc32 - checksum calculation
base - print or set address offset
printenv- print environment variables
setspi- print environment variables
getspi- print environment variables
phywrite- print environment variables
phyread- print environment variables
dumpphy- print environment variables
setenv - set environment variables
saveenv - save environment variables to persistent storage
protect - enable or disable FLASH write protection
erase - erase FLASH memory
flinfo - print FLASH memory information
bdinfo - print Board Info structure
iminfo - print header information for application image
loop - infinite loop on address range
mtest - simple RAM test
reset - Perform RESET of the CPU
echo - echo args to console
sleep - delay execution for some time
download - Perform bootload
assign - Perform give the device a mac
version - print monitor version
help - print online help
? - alias for 'help'